VizardM Mask is a reusable fabric holder specially adapted to allow an individual to change and install the filtering material on their own.

A MULTIPLE USE
A reusable inhaler can be used up to 3-5 days through the large intertissued decontaminated surface.

The holder allows the individual to independently change the material and regulate the air filtration system, providing the protection of the the respiratory system without special equipment.

The device, with the use of hygienic plastic, is in accordance with GOST-R 16337-77 and ЕС ISO 13485:2003
USAGE GUIDELINES
After unpacking, the fabric holder should be initially wiped with disinfectant and then wiped after every 2 hours of use.
The holder has 3 components:
Outer part
Holder
Inner part
1
2
3
HOW TO ADD FILTERING MATERIAL:
1. Gently pull off the outer part by relaxing the holder.
2. Attach the filtering material to the inner part.
3. Close the outer part.
4. Tighten the holder until the filter material is securely fixed.
5. Fix the edges of the filtering material.
THE METHOD OF REMOVING THE FILTER MATERIAL:
1. Gently pull off the outer part by relaxing the holder.
2. Remove the filter material from the inside.
3. Treat the holder with a disinfectant.
HOLDER CUSTOMIZATION
The holder provides creative options, allowing elements of the outer part to be customized.
The set includes colored inserts, which can be used to depict your individual drawing or inscription.
A cloth strip can also be attached to the holder.
The useful life of a standard medical mask is only about 2 hours due to the multiplication of viruses and bacteria on its surface. These masks also do not protect and not fit tightly enough to the face against viruses and bacteria but only the secretions of salivary glands. Compounding this, standard masks also tend to fit poorly, allowing dangerous materials to seep into openings.
Higher quality masks and respirators outperform those mentioned above and can protect against fine dust particles, but they cannot withstand viruses smaller than 2µm.
Most masks and respirators become inoperable quite quickly due to the fact that microorganisms begin to multiply directly on the surface of the tissue.
Even when wearing these masks, it is necessary to use infrared radiation, sterilization, bioactive tissue or ionization to stop the reproduction and destroy most viruses and bacteria.

CONTACT US

You can order the mask right now
Russia, 241520, p. Suponevo, st. Frunze, 87.
info@vizardmask.com
Registry code (Tax ID): 191336824
BDC-Elelectroniks Ltd.
Republic of Belarus, 220070, Minsk, Soltys st., building 187/1
EnCata Rus Ltd.
Russia, 121255, Moscow Region, D. Skolkovo, Bolshoy Blvd, 42, building 1, floor 1. 1, room 369.
Energy Point Ltd.
Ink-Technologies 2020 © All rights reserved